Home >News> PPGI Corrugated Roofing Sheet Substrate
PPGI Corrugated Roofing Sheet Substrate
What are the main types of substrates used to produce PPGI steel sheets, and what are the characteristics? low-cost hot-dip galvanized steel coil factory say.
There are four main categories of PPGI steel sheets classified by substrate:
1. Cold-rolled substrate color coated steel sheet. The PPGI plate produced by cold-rolled substrate has a smooth and beautiful appearance and has the processing property of cold-rolled sheet; however, any fine scratch of the surface coating exposes the cold-rolled substrate to the air, so that the iron is very dense. Quickly generate red rust. Therefore, such products can only be used for less demanding temporary insulation measures and for indoor materials.
2. Hot-dip galvanized color coated steel coils. The hot-dip galvanized color coated coil with hot dip galvanized steel coil has double protection effect of zinc layer and organic coating of hot dip galvanized steel coil. Its service life is longer than that of hot dip galvanized steel coils. It is suitable for use in environments where the exterior of the building has special requirements for corrosion resistance. The external hot-dip galvanizing substrate can be galvanized up to 275 g/m2 (double-sided).
3.? Hot-dip aluminum-zinc color coated steel sheet. Hot-dip aluminum-zinc steel sheets (such as 55% Al-Zn sheets and 5% Al-Zn sheets) have better surface appearance and corrosion resistance than pure hot-dip galvanized steel sheets, so only when there are special requirements Only as a color coated substrate.
4. Electroplated zinc color coated steel sheet. Since the zinc layer of the electrogalvanized sheet is thinner, the zinc content is usually 40 g/m2 (double-sided), and the production cost is higher than that of the hot dip galvanized steel coil. Therefore, the electrogalvanized PPGI sheet with the electro-galvanized sheet as the substrate is not suitable for use. In terms of construction. However, due to its beautiful appearance and excellent processing performance, it is mainly used in home appliances, audio, steel furniture, interior decoration and so on.
What is polyester and what are the characteristics of its coated products?
Polyester is a polycondensate of a polycarboxylic acid (generally a dibasic acid) and polyhydric alcohol (generally a di- or trihydric alcohol) which, upon addition of an amino resin, is heat curable. The hardness of the polyester coating can vary over a wide range. The coating is not easily discolored and has good chemical stability, heat resistance and deformability. The thickness of the coating is generally controlled in the range of 6 to 25 ??m, and is mainly used for coating building materials, vehicles and household appliances.
What is an alkyd resin and what are the characteristics of its coated products?
Alkyd resin is a modified polyester treated with linseed oil and the like. It is mixed with an amino resin and heat-cured to form a coating with good stability. Alkyd resins are currently used in large quantities for coating metal containers, furniture and industrial components, etc. The coatings have a beautiful appearance and good gloss. The thickness of the coating is approximately between 5 and 25 ??m.